NMR spectroscopy

Avance III 500 MHz

Measurements of 1D, 2D and 3D NMR spectra of liquids and solutions. Provides a broad range of analytical capabilities to solve non-routine problems from fields of chemistry and physics of condensed phase. Biomolecules (proteins, enzymes) and complicated organic molecules (polymers, natural compounds, steroids) could be studied. • Long measurements at low temperature (down to 100 K) • Three-channel architecture (from 1H to 109Ag) • Diffusion measurements at temperatures up to 350 K

Solid state NMR spectroscopy

Avance III 400 MHz

Designed to study samples in solid state: crystallines, powders, weakly ordered materials, gels, liquid crystals, amorphous compounds, nanostructures (zeolites, silicates) etc. Wide bore of the magnet and advanced set of probes allows one to study diffusion processes, obtain micro-tomographic images, record high resolution spectra with magic angle spinning etc. • Long low- and high-temperature measurements (from 130 to 870 K) • Microtomography (with small animal heartbeat and pulse monitoring unit) • Magic angle spinning up to 24 kHz • Diffusion measurements (gradients up to 3000 G/cm)

EPR spectroscopy

Elexsys E580

Setup working at 9400 MHz, (3.2 cm wavelength, X-band) suited for studies of paramagnetic centers (PC) in solids, liquids, solutions and gases. Measured spectroscopic characteristics are g-factors, lineshapes and relaxation parameters in a wide temperature range. Experimental complex is capable to determine electronic state of PCs, their location in a crystal lattice, crystal field anisotropy and super-fine interactions between unpaired electrons and nuclei. It is possible to study isotopic composition of PCs and their interaction with adjacent ions, to investigate the presence and type of magnetic interactions etc.

NMR spectroscopy

Avance NEO 500 MHz

Provides broad analytical capabilities for solving non-routine problems related to physics and chemistry of condensed phase. Biomolecules (proteins, enzymes) and complicated organic molecules (polymers, natural compounds, steroids) could be studied. Equipped with a Prodigy (BBO) broadband cryoprobe, which allows several times to reduce the time of lengthy heteronuclear NMR experiments.

Raman spectrometer

Research-grade Raman spectrometer T64000

The T64000 system is designed to provide a versatile platform for Raman analysis. It has an integrated triple spectrometer design for unprecedented optical stability. The optical coupling is efficient and throughput is limited only by theoretical considerations.

Raman spectrometer

Raman spectrometer Horiba Jobin-Yvon LabRam HR800

Raman spectrometer Horiba Jobin-Yvon LabRam HR800 used for registration of spectra of Raman scattering. A main aims are identification of the studied substances in solid, liquid or gaseous states, phase diagnostic of inclusions in minerals, assessment of the degree of crystallinity of the substance, studies the transformation of substances in the chemical and electrochemical reactions, studies of changes in biological tissues.

Raman spectrometer

Express-Raman spectrometer SENTERRA

Presented spectrometer allows to conduct express and routine measurement of Raman spectra. The complex has the ability to measure liquids and solid samples: glassy, crystalline, organic and inorganic substances in the form of powders, thin films, and can work with microquantities of the substances. The complex has a system of optical imaging of the samples - Olympus. The spectrometer is equipped with three lasers with wavelengths of 488, 532, 785 nm, and fiber-optic sensor for registering the spectra of samples in an external sample compartment.

Spectrofluorimeter

Modular spectrofluorimeter Fluorolog-3

The device is designed to produce emission spectra, excitation spectra, measurements of the lifetimes of excited states, to study the molecular dynamics in solution. Double monochromators in the excitation and emission channels, heavy duty xenon lamp as the light source and the detection system operates on the basis of accounts of individual photons, can achieve the unique sensitivity and signal/noise ratio. Device equipped with fluorescence lifetime measurement based on time-correlated single photon counting (TCSPC).

Spectrophotometer

Lambda 1050

Spectrophotometer Lambda 1050 is a two-beam scanning spectrophotometer with double monochromator. Spectrophotometer Lambda 1050 performs the measurement of optical characteristics such as optical density, reflection and transmission coefficients of liquid and solid materials, including light-scattering inorganic, organic and biological objects within the wavelength range 175 – 3300 nm.

Nanoparticle Analyzer

SZ-100

The SZ-100 uses the technique of dynamic light scattering to determine particle size. Dynamic light scattering is the measurement of fluctuations in scattered light intensity with time. These fluctuations in intensity arise due to the random Brownian motion of the nanoparticles. Therefore, the statistical behavior of these fluctuations in scattered intensity can be related to the diffusion of the particles. Since larger particles diffuse more slowly than small particles one can readily relate particle size to measured fluctuations in light scattering intensity.

Photoelectron spectrometer

Combined Auger, X-ray and Ultraviolet Photoelectron spectrometer Thermo Fisher Scientific ESCAlab 250Xi

Spectrometer ESCALAB 250Xi is considered as the modern complex of electron spectroscopic equipment that can solve most of the modern diagnostic-type tasks of the synthesized organic and inorganic materials.

Photoelectron spectrometer, atomic force microscopy

Research modular platform Nanolab

This research platform allows to solve synthesis and diagnostic tasks for nano-objects with description of processes at the atomic level, and analysis of fine features of the electronic energy and spin structure of nano-objects facilitating the creation of cutting-edge technologies and research in the most modern and relevant areas of nanoelectronics and spintronics.

Magnetron sputtering

Vacuum magnetron sputtering station Kepler 450

The station is designed for applying coatings by magnetron sputtering.

Scanning electron microscope

Supra 40VP

Zeiss Supra 40VP is a Scanning Electron Microscope with Field Emission cathode, GEMINI electron-optics column, oil-free vacuum system, and variable pressure (VP) operating mode. Unit capabilities are extended with, Gatan MonoCL3+ Spectrometer and Gatan SmartEBIC electron beam induced current (EBIC) registration system.

Transmission electron microscope

Libra 200FE

Libra 200 FE is an analytical transmission electron microscope for material science. Equipped with high efficient Field Emission cathode and energy Omega-filter it is suitable for high-accuracy measurements of structure and atomic compositional of nano-sized objects at ultimate resolution. Unit capabilities are extended with Oxford Instruments Inca X-max EDX spectrometer and set of sample holders for in-situ experiments.

Scanning electron/ion microscope

Auriga Laser

Cross-beam SEM-FIB workstation equipped with laser chamber. Unit capabilities are extended with Oxford Instruments AZtecOne EDX spectrometer, Gatan SmartEBIC electron beam induced current (EBIC) registration system and Raith ELPHY Quantum for Electron- and ion- beam lithography

Scanning ion microscope

Orion +

Scanning Helium Ion Microscope is a device that incorporates both Focused Ion Beam and Scanning Electron Microscopy approaches. Unit capabilities are extended with NanoMaker lithography system

Atomic Layer Deposition (ALD) installation

Nanoserf

Synthesis of thin films of various compounds (Al2O3, TiO2, ZnO, HfO2, VO2, SnO2 et al.) designed thickness on the surface of flat, \"3D\" substrates and dispersed materials by Atomic Layer Deposition (ALD).3

Atomic Layer Deposition (ALD) installation

Solar-MN

Synthesis of thin films of various compounds (Al2O3, TiO2, ZnO, HfO2, VO2, SnO2 et al.) designed thickness on the surface of flat, \"3D\" substrates and dispersed materials by Atomic Layer Deposition (ALD).

HAAKE MiniLab II

HAAKE MiniLab II

Solartron 1260/1287

Solartron 1260/1287

The measuring complex, consisting of a frequency response analyzer (impedance meter) Solartron 1260A, a potentiostat/galvanostat Solartron 1287, a ProboStat measuring cell, a lift furnace and a ProGasMix gas mixture preparation unit, allows for the measurement of electrochemical and electrophysical characteristics of materials in a wide temperature range (up to 1200°C), in various gas environments, in a frequency range from 10 μHz to 32 MHz.

Micromeritics/ASAP 2020 MP

Micromeritics/ASAP 2020 MP

Automated system ASAP 2020MP (Micromeritics) is used to determine the surface area and pore structure study of dispersed materials. The system allows for analysis of micro- and mesopores, their size distribution and surface area determination. Measuring of pores size from 0.35 to 500 nm.

Malvern/Mastersizer 3000

Malvern/Mastersizer 3000

Laser diffraction particle size analyzer Mastersizer 3000 – a versatile tool for the rapid and accurate particle size analysis (measurement of particles size distribution), suspensions, emulsions in the range from 10 nm to millimeters, all in an extremely compact package.

Lake Shore/7410 VSM

Lake Shore/7410 VSM

The vibrating magnetometer (Lake Shore 7410) allows measure the magnetization of samples in the range from 10-7 to 103 Am2/kg at magnetic fields up to 2.3 T in the temperature range from 4.4 K to 450 K in an inert atmosphere or vacuum. The rotating holder allows determine the easy lines of magnetization.

Setaram/Sеtsys Evolution 16

Setaram/Sеtsys Evolution 16

Device for thermal testing of materials SETSYS Evolution 16 (Setaram, France) allows the thermal gravimetric analysis (TGA), differential thermal analysis (DTA), differential scanning calorimetry (DSC) in the temperature range from ambient to 1 600oC.

Shimadzu/EDX-800P

Shimadzu/EDX-800P

Energy dispersive X-ray fluorescence spectrometer EDX Series 800 HS (Shimadzu) is designed for rapid analysis of the elemental composition of the samples. Elements detection range – from carbon to uranium.

Shimadzu/AG-50kNXD

Shimadzu/AG-50kNXD

Board testing machine AG-50kNXD (Shimadzu) allows a wide range of loads (50 N to 50 kN) testing the tensile and compression fracture of various materials, building automatic deformation curves in the standard coordinates and determination of mechanical properties of materials.

Inductively coupled plasma optical emission spectrometer

ICPE-9000

The ICPE-9000 optical emission spectrometer is vacuum–operated ICP spectrometer with a CCD detector with an optical Echelle spectrometer circuit, which allows for qualitative and quantitative analysis of unknown chemical composition samples without prior setting of operating wavelengths by the operator and provides detection of most elements at the level of 1-10 ppb and below with a linearity range of 5-6 orders of magnitude.

Energy dispersive X-ray fluorescence spectrometer

EDX-800P

The EDX-800P spectrometer is designed for fast non-destructive determination of the qualitative and quantitative elemental composition (from C6 to U92) of solid and liquid samples, powders, granules, plates and films with the possibility of analysis in air, vacuum or helium.

Gas chromatograph–mass spectrometer

GCMS-QP2010Ultra, equipped with a combined dispenser for automatic dosing of liquid and equilibrium vapor samples AOC-5000

GCMS-QP2010 Ultra based on GC-2010 Plus is gas chromatograph–mass spectrometer, which is applied in qualitative and quantitative analysis in pharmaceutical industry, determination the composition of air and others. New ultrafast quadrupole mass selective detector allows doubling the scanning speed of the GSM system compared to the previous generation of devices and optimizes the detector parameters depending on the m/z value of the analyzed ions.

Ultra-High-performance liquid chromatograph - mass spectrometer

MaXis

MaXis is UHPLC system with a combined ultra-high resolution quadrupole-time-of-flight electrospray ionization (ESI-QTOF) mass spectrometer of the MaXis series allows detection and identification of both known compounds and their metabolites and unknown compounds in wide mass range from 20 to 40,000 Da (drugs, pesticides, etc.), to carry out simultaneous analysis of main and trace components, determine true isotope ratio to accurately determine the molecular formulas.

High-performance liquid chromatograph

LC-20 Prominence

LC-20 Prominence is applied in analysis and separation of mixtures of substances with the possibility of autonomous operation (without operator). Its distinctive features are extremely high sensitivity and performance. The tablet replacement device in the Rack Changer autoclave allows sequential automatic analysis of up to 1,152 samples. Because of thermostating of measuring cells and new signal processing technology (SPD-20A spectrophotometric detector and SPD-M20A diode matrix detector), the world\'s lowest noise level and highest sensitivity are ensured.

CHNS-elemental analyzer

LECO TruSpec MICRO

The TruSpec Micro delivers optimal performance in carbon, hydrogen, nitrogen and sulfur determination in solid micro samples. Analytical range at nominal sample mass of 2 mg: carbon 0,002 - 100%; hydrogen 0,02 - 50%; nitrogen 0,02 - 50%; sulfur 0,04 - 65%/

Gas Adsorption Analyzer

Surface Area Analyzer and Pore Size Analyzer Quadrasorb SI

The automatic Surface Area and Porosity Analyzer QUADRASORB SI carries out the fast highly exact analysis of surface area of a sample by the BET method, the volume of pores by the BJH method, and also detailed pore size distributions due to the full adsorption and desorption capability.